For Batter Board Setup

Brackets lock the 2" x 4" horizontally, supported by the metal stake

Brackets lock the 2" x 4" horizontally, supported by the wood stake

Batter boards are locked into place after the using the brackets during the job

For Rebar Setup

Fundation Form Setup

Make sure the brackets are locked into the metal stake or wood stake securely

An individual will put one side of the form board onto one of the brackets

After putting the form board on both brackets, make all adjustments needed before locking boards in with the bolt

Cabinet Palms

Use a beam level to measure the bottom placement of the wall cabinets before installation

Lock a 2" x 4" piece into the wall stud

Screw in a pair of cabinet palms into the 2" x4"

Put an adjusting screw into the cabinet palm to hold up the cabinets

Put cabinet on top of the tool and use the adjusting screw to level it into place.

Move the adjusting screw to the other side in order for another cabinet to be placed next to it

We moved the cabinet palms over to install another cabinet

Cabinet palms are able to install 24 inches deep cabinets too

Cabinet palms are able to be locked into the wood stud without the 2" x 4" horizontal piece

Secure it with a u bracket locking screw into the inside of the cabinet frame.

Release the outside palm locking screw to a lower position and place the crown molding in between

Lock up to palms to hold up the crown molding.

Make the wanted marks and cuts before finishing the job.

For Batter Board Setup

Brackets lock the 2" x 4" horizontally, supported by the metal stake

Brackets lock the 2" x 4" horizontally, supported by the wood stake

Batter boards are locked into place after the using the brackets during the job

For Rebar Setup
Fundation Form Setup

Make sure the brackets are locked into the metal stake or wood stake securely

An individual will put one side of the form board onto one of the brackets

After putting the form board on both brackets, make all adjustments needed before locking boards in with the bolt

Cabinet Palms

Use a beam level to measure the bottom placement of the wall cabinets before installation

Lock a 2" x 4" piece into the wall stud

Screw in a pair of cabinet palms into the 2" x4"

Put an adjusting screw into the cabinet palm to hold up the cabinets

Put cabinet on top of the tool and use the adjusting screw to level it into place.

Move the adjusting screw to the other side in order for another cabinet to be placed next to it

We moved the cabinet palms over to install another cabinet

Cabinet palms are able to install 24 inches deep cabinets too

Cabinet palms are able to be locked into the wood stud without the 2" x 4" horizontal piece

Secure it with a u bracket locking screw into the inside of the cabinet frame.

Release the outside palm locking screw to a lower position and place the crown molding in between

Lock up to palms to hold up the crown molding.

Make the wanted marks and cuts before finishing the job.

Contact us

1667 Hollenbeck Ave #2-201
Sunnyvale
CA 94087
(408)-242-3878

jcinventions.us@gmail.com
Copyright © 2017

Contact us

1667 Hollenbeck Ave #2-201
Sunnyvale
CA 94087
(408)-242-3878

jcinventions.us@gmail.com
Copyright © 2017